How do I fix no boot device available?

İçindekiler:

1. How do I fix no boot device available?
2. How do I fix Windows 10 boot device failed?
3. What is UEFI boot mode?
4. How do you get into the BIOS in Windows 10?
5. How do I reset my HP laptop BIOS?

How do I fix no boot device available?

To change this:

1. Restart the system.
2. Press F2 during system start to enter the System Settings.
3. Change the Boot Sequence in the Boot Settings.
4. Leave the menu via Exit in the upper right corner of the screen.

How do I fix Windows 10 boot device failed?

How to fix the Selected Boot Device Failed error

1. Method 1: Disabling Secure Boot and Enabling Legacy BOot from BIOS settings.
2. Method 2: Performing a Startup Repair using Command Prompt.
3. Method 3: Performing a repair install or a clean install.
4. Method 4: Investigating a hardware failure.

What is UEFI boot mode?

UEFI boot mode refers to the boot process used by UEFI firmware. UEFI stores all the information about initialization and startup in an . efi file that is saved on a special partition called EFI System Partition (ESP). ... The UEFI firmware scans the GPTs to find an EFI Service Partition to boot from.

How do you get into the BIOS in Windows 10?

In order to access BIOS on a Windows PC, you must press your BIOS key set by your manufacturer which could be F10, F2, F12, F1, or DEL. If your PC goes through its power on self-test startup too quickly, you can also enter BIOS through Windows 10's advanced start menu recovery settings.

How do I reset my HP laptop BIOS?

HP Notebooks PCs - Restoring Defaults in BIOS

1. Backup and save important information on your computer, and then turn off the computer.
2. Turn on the computer, and then click F10, until the BIOS opens.
3. Under the Main tab, use the up and down arrow keys to select Restore Defaults. ...
4. Select Yes.